Archive for January, 2010

OE vs. Aftermarket

Tuesday, January 26th, 2010

Oregon new car dealerships are happy to leave you with the impression that you should have all of your scheduled automotive maintenance performed at the dealership during the warranty period. Some go so far as to imply that your warranty protection depends on it. In fact, nothing is further from the truth. Federal laws in both the United States and Canada specify that you do not have to have your vehicle serviced at a dealership to maintain warranty protection. The laws further state that a vehicle manufacturer cannot mandate that you use their particular brand of replacement parts or fluids. This certainly means you have many more service options, but what about quality?

First off, it is important to know that vehicle manufacturers do not make all of their own parts. They look to thousands of independent suppliers to manufacture the parts that go into your car or truck. Many of these same manufacturers that make the parts that are original equipment for a new vehicle, also supply parts for the automotive aftermarket. That means that your local service center such as Tyler’s Automotive has access to quality parts that meet or exceed auto makers’ specifications. Your service consultant can offer a range of parts solutions that give you the option to save some money or to upgrade to a higher performance part.

While TV commercials for auto dealerships will tout “genuine” parts, your Wilsonville service center has the option to not only use that same part, but to help you choose one that better meets your driving needs. Dealership ads often promote the notion that only their technicians are up to the task of servicing their particular make of vehicle. That may be true if you drive a Ferrari, but for the rest of us, the training that your local service technicians receive is transferable to any vehicle.

Today’s service databases enable your Tigard or Wilsonville service provider to get the right parts and to follow the right procedures to take care of your car. The diagnostic technology and equipment your service center uses enables them to get you back on the road as economically as possible. Speaking of economics, aftermarket labor rates are nearly twenty percent lower than dealership rates.

So there you have it. Your local Portland area service centers are more convenient than auto dealerships, are more economical and provide high quality parts and products. And, your warranty is protected unless the manufacturer can demonstrate that a particular part lead to a warranty failure. In addition, you have more options as to where you have your vehicle serviced or repaired and you can take advantage of innovations and improvements that aren’t available at the dealership.

Posted in Parts | No Comments »

Coolant Service at Tyler’s Automotive

Friday, January 22nd, 2010

Our cars have to operate in a wide range of Wilsonville, Oregon temperatures and our engine coolant must be able to perform ‘no matter what’. Think for a moment about the environment where the coolant works. Very hot, high pressure, corrosive…

And all the while, it has to protect the components of the cooling system from corrosion. These components are made from steel and aluminum, plastics and rubber. The coolant has to be formulated to protect against corrosion for all of these different materials. That’s why different manufacturers recommend different types of anti-freeze for our Wilsonville, Oregon vehicles.

There are several different ‘families’ of anti-freeze available to us here in Wilsonville, Oregon. Your owners’ manual will tell you what kind you should use. Of course, Tyler’s Automotive will know what to put in your car.

It’s important to stay on top of this because coolant system failure is the most common mechanical problem people have here in Wilsonville, Oregon. Regular service at Tyler’s Automotive needs to be done to avoid failures and also to keep your warranty in place.

While the specifics of the service required may vary from vehicle to vehicle, your service consultant at Tyler’s Automotive will know what to do. You’ll be advised to replace the coolant at specified intervals.

Some manufacturers may recommend periodic coolant system flushes. A flush adds a cleaning step to the fluid replacement process. Again, check to see what your service consultant recommends.

Someday, you may have to deal with an overheating problem, so you need to know what to do if your coolant temperature warning light comes on or your temperature gauge is in the hot zone.

Now, overheating can be very expensive. You can literally melt down your engine and have to replace the whole thing. So take the warning signs seriously and take immediate steps.

First turn off the air conditioner. This will lower engine temperature right away. Next turn your heater to maximum heat and run the fan at high speed. You might need to roll down the windows, but this will take a lot of heat off the engine.

Pull over as soon as you can safely do so, especially if you are stuck in slow-moving traffic, and shut the car off. It may take as much as 45 minutes for the engine to cool to the point that it’s safe to operate the car again.

If you need to add water or antifreeze, be sure to wait until the car cools down. Opening the radiator cap or even the overflow bottle when the coolant is hot and under pressure may result in serious burns.

So after the engine has cooled for 45 minutes or so, look to see if the coolant is low in the overflow tank. If so, you can cover the overflow tank cap with a large cloth and open the lid. Then start the engine and pour in some water or antifreeze. Pouring it in when the car is running will circulate the new, cool fluid with the warmer fluid in the engine and avoid engine damage.

Of course, overheating is a serious problem and you need to get it fixed right away. Tyler’s Automotive can make sure the coolant is right before you drive home.

Those spring and winter inspections really come in handy when they head off a cooling system problem. And don’t forget that severe service driving conditions, like towing or hot, dusty driving around Wilsonville, Oregon, mean that you’ll need to service your coolant more frequently.

At AutoNetTV, we suggest that you have Tyler’s Automotive inspect your coolant system to find small problems before they become big, and to change belts and hoses before they fail. After all, we don’t want you to lose your cool out there in Wilsonville, Oregon.

Posted in Cooling System | No Comments »

Alignment Servce

Wednesday, January 13th, 2010

Your car might have an alignment problem if: it drifts or pulls to one side, your steering wheel’s off center, you have uneven tire wear or your car doesn’t feel like it handles right. When all of a vehicle’s wheels are lined up exactly with each other, your wheels are in alignment. Running into potholes, smacking a curb or other object are great ways to knock your car out of alignment. Then one or more of your wheels starts pulling in a slightly different direction and the problems begin.

Driving for an extended time when you’re out of alignment causes your tires to wear unevenly and excessively. This can be dangerous and expensive. You’ll have to replace your tires sooner, but even worse – you may cause premature wear to your suspension system, which can be really expensive.

The front wheel alignment is adjustable on all vehicles, and the back wheels are also adjustable on some cars. The adjustment can go three different ways. The first adjustment is called toe. The next adjustment is called camber. And finally, there is castor. The engineers who designed your vehicle determined the alignment settings that will give you the best handling and safety.

There are several things involved in an alignment check. First, there’s an inspection of the steering and suspension – it should be checked to see if anything’s bent or broken. Then the tire condition needs to be inspected. From there, the vehicle is put on an alignment rack and an initial alignment reading is taken. If all four wheels are adjustable, they are lined up perfectly parallel with the vehicle’s center line. If the back wheels aren’t adjustable, the technician determines the direction they push and then aligns the front wheels to match.

Like most things, your manufacturer has suggested a mileage interval for having your alignment checked. But if you run into a curb, pothole or something else that’s given you a big jolt, pay attention to whether your vehicle is pulling to one side when you drive. It’s better to have your alignment checked before waiting to see if there is uneven tire tread wear – by then, the damage is done.

Getting your alignment checked when needed is a great way to extend the life of your tires and suspension parts. It also makes sure that your tire meets the road properly for maximum performance and safety. For more information about alignment, call Tyler’s Automotive at 503.682.9181.

Posted in Alignment | No Comments »

PCV Valve Replacement

Wednesday, January 6th, 2010

The energy from exploding fuel is what powers your engine. But some of the vapors from the explosions escape into the lower part of the engine, called the crankcase. The crankcase is where your engine oil hangs out. These gases are about 70% unburned fuel. If the gases were allowed to stay in the crankcase, they would quickly contaminate the oil and turn it to sludge. Sludge is one of the biggest enemies of your engine, clogging it up, eventually leading to expensive failures. Also, the pressure build up would cause seals and gaskets to blow out. Therefore, these gases need to be vented out.

Gasoline engines used to simply have a hose that let the poisonous fumes vent out into the air. In 1963, the federal government required gas engines to have a special one-way valve installed to help reduce dangerous emissions. Diesel engines are not required to have these valves.

The positive crankcase ventilation, or PCV, valve routes crankcase gases through a hose and back into the air intake system where they are re-burned in the engine. Fresh, clean air is brought into the crankcase through a breather tube. It’s really a pretty simple system, but does an important job. The re-circulating air removes moisture and combustion waste from the crankcase, preventing sludge. This extends not only the life of your oil, but the engine as well. The PCV relieves pressure in the crankcase, preventing oil leaks.

Eventually, the PCV valve can get gummed up. Then it can not move enough air through the engine to keep it working efficiently. If the PCV valve is sticking enough, you could have oil leaks, excess oil consumption and a fouled intake system. If you experience hesitation or surging or an oil leak, it may be a sign of PCV value problems. Your owners’ manual may give a recommendation for when the PCV valve should be replaced – usually between 20,000 mi/32,000 km and 50,000 mi/80,000 km. Unfortunately, some manufacturers don’t list a recommendation in the manual, so it can be easy to overlook.

Many PCV system problems can be diagnosed with a visual inspection. Fortunately, PCV valve replacement is both quick and inexpensive. Proper oil changes will greatly extend the life of the PCV valve. Skipping a few recommended oil changes can allow varnish and gum to build up in the valve, reducing its efficiency. So now when your Wilsonville service technician tells you its time to replace your PCV valve, you will know what he’s talking about. If you have had your car for a while and this is the first you’ve ever heard of a PCV value, ask your tech to check yours out or call Tyler’s Automotive at 503.682.9181.

Posted in Parts | No Comments »