Tyler's Automotive TV

The government mandates a lot of equipment on cars: emission devices and control computers; safety equipment like airbags; and crash worthiness requirements. All of this is great for the motoring public, but it does add quite a bit to the price of a new car.

Because new cars are more expensive, Oregon drivers are using their old cars longer. The average car is now over nine years old. 68% of vehicles on the road have more than 75,000 miles/120,000 kilometers. As cars age, their performance drops, they have difficulty idling for long periods and are more sensitive to weather extremes. Fortunately today’s cars are up to the challenge – but they need a little help to keep on going.

Some owner’s manuals don’t specify service requirements at higher mileage. That doesn’t mean it doesn’t have to be done. In fact, it’s more important than ever to stay on top of routine maintenance for cars with more than 120,000 miles/190,000 kilometers. Just extend regular service intervals out: for instance a service that’s recommended every 24,000 miles/38,000 kilometers should be performed at 24,000 mi/38,000 km; 48,000 mi/77,000 km; 72,000mi/116,000 km, 96,000 mi/154,000 km; and on and on.

Because of the additional stress older engines experience, the severe service maintenance schedule may be more appropriate than the regular schedule. Watch for leaks – seals and gaskets dry out over time and do not hold the fluids as well as they used to. It is also time to make sure you have a good technician like the pros at Tyler’s Automotive in Wilsonville. There are some services and replacements that are scheduled after you put some clicks on the odometer, like timing belts, valve train adjustments, suspension, anti-lock brake service, air bags, etc. And unexpected repairs down the road are just par for the course.

Check for unusual sounds, smells or the way your car feels. These could be hints that trouble is brewing. Better to catch it early before it turns into a costly repair. Regular wash and wax will help maintain your car’s appearance. One of the things you can do to really help your high mileage vehicle is to begin using high mileage formulation fluids. There are special engine oils, coolants, and transmission and power steering fluids that are formulated for cars that have a higher mileage.

High mileage oil is designed to condition seals and gaskets, reduce wear and avoid premature burn off. Older engines are dirtier inside – and dirty engines contaminate their oil faster. High mileage oil has special additives that clean the engine, removing sludge deposits over time. The result is less stress on the engine, better fuel economy and excellent wear protection.

Studies have even shown that using high mileage fluids early will actually prevent some of the problems of high kilometer vehicles. So once you hit around 50,000 mi/80,000 km, consider stepping up to high mileage formulations. The fluids cost a bit more than standard fluids because of the additional additives, but they can be worth their weight in gold in terms of preventing repair costs down the road.

It does cost more to properly maintain a higher mileage vehicle – but it’s much cheaper than a new car payment!

The last new car sold with a carburetor in North America rolled out of the dealership in 1990. Since then, all new vehicles have had fuel injectors. In very simple terms, a fuel injector is a valve that squirts fuel into your engine. Your engine control computer tells the fuel injector how much gas to deliver as well as the precise time it should be delivered. Of course this happens thousands of times a minute. Fuel injection is a much more precise way of delivering fuel than carburetors. That translates into better fuel economy and power. Virtually all fuel injectors for gas engines are known as port fuel injectors because they deliver the fuel to a port just outside the cylinder. Port fuel injectors operate at about 40 to 80 pounds per square inch of pressure.

A few auto makers have introduced gas direct injection systems on some engines recently. These systems inject the gas directly into the cylinders under very high pressure – hundreds of times the pressure of port injection systems. Although more complicated, direct injection technology promises greater power with improved fuel economy, so we can expect to see more of it in the future.

As you can see, the level of precision required of your fuel injectors is very high. They need to be operating properly in order for your car to run right.

High temperatures under your hood and variations in gas quality cause fuel injectors to become fouled with wax, dirt, and carbon. Injectors can become partially clogged, preventing them from delivering the proper amount of fuel at the correct pressure. The design of each engine requires a specific spray pattern from the fuel injector that might be altered when the injector is dirty. When injectors are dirty, the fuel doesn’t burn as efficiently resulting in poor fuel economy and loss of power. So it is important to keep your fuel injectors clean.

Skilled service technicians at Tyler’s Automotive in Wilsonville can perform a fuel system service for you. (Visit http://www.tylersautomotive.com/contact-us.html.) That is a fuel system service – not just fuel injector cleaning. That is because the fuel has a lot of ways to become dirty or contaminated between the gas tank and the fuel injector. A fuel system service starts with a fuel filter replacement. This filter cleans the gas as it leaves the tank. The various parts of the fuel intake system need to be cleaned from time to time to remove harmful gum, deposits and varnish. Finally, the fuel injectors are cleaned so that they operate properly and deliver the right amount of fuel at the right time.

Your Newberg area service center uses a process for cleaning your fuel system that includes state-of-the-art cleaning chemicals as well as some old fashioned scrubbing. Proper maintenance of your fuel system means that you will spend less on gas, enjoy strong performance and prevent costly repairs down the road.